Engineered Heating Cable Systems - Roof Ice Melt Engineered Heating Cable Systems - Roof Ice Melt
   
ABOUT BYLIN
ROOF ICE MELT SYSTEMS
Roof Ice Melt Products
RIM Recommendations
RIM Product
RIM2 Product
Zig-Zag Heating Cable
Snow Load Classifications
Processing a Project
Control Systems
Recommended Specifications
PAVEMENT SNOWMELTING
RADIANT FLOOR HEATING
PIPE HEAT TRACING
FROST HEAVE PREVENTION
CONTACT US
HOME
 
 
 
 
 

Roof Ice Melt System

Page 1 of 2 > Next >

RIM EAVE PANEL - CLASS 1 AREAS
The patented RIM Eave Panel is designed to mount on the roof eave and minimize the formation of icicles and ice dams during the winter season. First developed in 1993, RIM Eave panels have successfully eliminated icicle and ice dam problems on thousands of commercial and residential applications. It is used in Class 1 areas - greater than 15" on the roof for a large portion of the winter.

Specifications:
  • Power output – 36w/ft
  • Material Selection: Copper or Kynar painted aluminum
  • Heating Cable Supplied:
    • 3 runs per foot of panel
    • Model SRH-1 for 120V operation
    • Model SRH-2 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths: Up to 10 feet per panel
  • Components Supplied: Power connection kit, panel splice covers, panel end caps
 

 

 

 

RIM VALLEY PANEL
The patented RIM Valley Panel is designed to mount in the roof valleys and to provide a heated melt path down the valley and prevent water ponding behind ice dams.  The RIM Valley Panel should be used with the RIM Eave Panels to ensure that snowmelt draining down the roof to the valleys does not freeze and form ice dams in the lower portion of the valley.
Specifications:
  • Power output – 24w/ft

  • Material Selection: Copper or Kynar painted aluminum

  • Color Selection (Alum.): 23 standard colors, 8 custom colors

  • Heating Cable Supplied:

    • 2 runs per foot of panel
    • Model SRH-1 for 120V operation
    • Model SRH-2 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths: Up to 10 feet per panel

  • Components Supplied: Power connection kit

 

 

 

 

RIM LOW-PITCH PANEL
The patented RIM LP Eave Panel is specifically designed for integration with metal roof systems and for applications involving roof pitches of 3:12 or less. It is used in areas with heavy snow accumulation
Specifications:
  • Power output – 24w/ft
  • Material Selection: Copper or Kynar painted aluminum
  • Color Selection (Alum.): 23 standard colors, 8 custom colors
  • Heating Cable Supplied:
    • 2 runs per foot of panel
    • Model SRH-1 for 120V operation
    • Model SRH-2 for 208, 240 and 277V operation
    • UL and CSA approved for roof and gutter de-icing
  • Panel Lengths: Up to 10 feet per panel
  • Components Supplied: Power connection kit(s)

Note: Heated gutters and downspouts should be specified for eaves above walkways, driveways, decks and lower roofs.

 

 

 

 

RIM CUSTOM PANEL
Sometimes a roof design has a unique snow, ice dam or icicle problem.  Bylin’s years of experience and expertise in heat transfer allows us to create innovative and economical solutions for any problem.
Some of those products include:


RIM Channel Panel

 

 


RIM Snowmelt Panel

 


RIM Rake Panel
   

 

 

 
 
Home | Technical Info | Site Map | Privacy Policy | © 2006 Bylin Engineered Systems | 916.933.5666 | info@bylinusa.com